Once done, test the power button again. These remotes have the same functions as the S10 one, but they are more advanced. When it comes to controls, there is no difference between the S20 and S30 remotes. Before you start programming your remote, turn on the TV and make sure the protective battery strip is removed. Before you start, you should turn on your audio device and make sure the protective battery strip is removed.
As a side note, you will not be able to change your TV volume with the U-Verse remote once you program the audio device. Use your regular TV remote for that. Akai Audiovox DiamondVision , , Denon Soundbar. Samsung Soundbar. Chunghop RME. GE Universal Remote. Make sure the remote flashes. All of the Mode buttons should flash twice when you release. This indicates that you are in Programming Mode.
Pause briefly between each button press. Repeat until the device you are programming turns off. Press the Power button to turn the device back on. Check your functions.
Once you power the device back on, make sure that the Volume and Mute functions work properly. Press Enter to save the programming. The Mode that you are programming will display a single long flash to confirm that the programming was saved. Method 3. Turn on the device you want to program. Note that only certain devices will work with the remote——look in your user manual to be sure that yours is included. Find the 4-digit setup code for the desired device.
You can browse the list of all supported devices and there codes here. Press and hold the appropriate key on the remote. Then, hold down the OK key at the same time. Hold both keys for one second, then release. The four Mode keys will flash to indicate that you have entered programming mode. Enter the 4-digit code from Step 2. If you have entered the correct code, the Mode key will flash once for a sustained period. If the wrong code was entered, your Mode key will flash 8 times, and you will need to restart the process from Step 1.
If this happens, try entering your code again. Keep in mind that you'll have to start over if the device times out. Some manufacturers have multiple codes. If you enter a code and can't get the device to work, try entering the next code on the list. Point the remote control at your device. Press the power key one time. The device should turn off. If it does not, try starting again at Step 1. Method 4. Then, point the remote control at the device. If you cannot find your user manual, you can search your remote control's memory for the 4-digit code device code.
This is also effective if the desired device isn't listed in the manual. At the same time, hold the OK key. All keys should flash twice. Press and hold the PLAY button.
0コメント